Other products

Due to excellent formability and corrosion resistance, stainless steel is suitable as an alternative for some traditional building materials. In particular, the most significant advantages that the engineer can keep in mind when assessing potential opportunities for the use of stainless steel are:

  • good mechanical properties
  • high deformability prior to breakage
  • the ability to absorb large quantities of energy
  • tenacity even at low temperatures
  • fire resistance
  • no maintenance required
  • complete recyclability

The applications of these products are in high demand and cover the following sectors:

  • Architecture
  • Construction and Public works
  • Restoration of monumental buildings
  • Furnishing of urban and public spaces

Valbruna offers a wide range of products that are suitable for construction.

  • STAINLESS STEEL TYING WIRE

    • From 1 to 1,60 mm
    • Steel types: AISI 304/304L – AISI 316/316L
  • STAINLESS STEEL THREADED RODS

    • From M5 to M24
    • Length: From 1 to 4 meters
    • Steel types: A2 & A4
  • STAINLESS STEEL FLAT BARS

    • Width: 10 ÷ 600 mm
    • Thickness: 3 ÷ 550 mm
    • Steel types: AISI 304/304L – AISI 316/316L
    • Duplex and Ferritic steel
  • STAINLESS STEEL ANGLE BARS

    • From 20x20x3 to 100x100x12
    • Steel types: AISI 304/304L – AISI 316/316L
    • Duplex and ferritic steel
  • CUT TO LENGTH SHEETS FROM COIL

    • Thickness: 0,5 ÷ 2,5 mm – Length max 6300 mm
    • Thickness: 3,0 ÷ 10,0 mm – Length max 11000 mm
    • Steel type: AISI 304L – Thickness from 0,5 to 12 mm
    • Steel type: AISI 316L – Thickness from 0,8 to 12 mm
    • Steel type: AISI F51 – Thickness from 2 to 6 mm
  • PLASMA CUT SHAPES

    • Steel type: AISI 304L – AISI 316L up to a thickness of 120 mm
    • Steel type: AISI F51 – up to a thickness of 40 mm
    • Steel type: AISI 316Ti – up to a thickness of 100 mm

OTHER STAINLESS STEEL PRODUCTS

The Valbruna Group, supported by its partners and associated firms is able to supply:

  • Blooms and Billets
  • Ingots
  • Round Bars
  • Square Bars
  • Hexagonal Bars
  • Wire
  • Wire rod
  • Welded Tubes
  • Sheets from coil
  • Quarter plates
  • Carpentry and mechanical processing materials
  • Sawn flats and plates
  • Cut to size pieces
Sales & Technical contact [email protected]