• WIRE&TUBE, DUESSELDORF, APRIL 15th-19th Click here to read the news.

VAL1Z- Martensitic Stainless Steel

Steel data sheets

Choose the measure unit in which display the data:

Valbruna Grade

VAL1Z

Steel type

Martensitic Stainless Steel

Description of material

VAL1Z is the oldest and most popular free machining martensitic stainless steel, with a Carbon content capable of producing a suitable value of hardness after heat treatment, together with a very good machinability, and is widely used in automatic machining industries.

Applications

All applications where moderate hardness with a moderate corrosion resistance are indispensable, such as parts of pumps, pump shafts, gears, wear resistant devices, bolts, nuts, valves stems and shaftings. VAL1Z, in the hardened and low temperature tempered condition, provides a hardness matching that of VAL1. This grade is not recommended for applications in pressure vessels and shouldn’t be used for high polishability or mirror finishing processes.

Melting practices

EAF+AOD

Corrosion resistance

It should be well considered that, as with all free machining grades, Sulphur is added to improve machinability, and the formation of MnS inclusions could prime points of pitting if exposed to some corrosive environments. VAL1Z has a good resistance to mildly corrosive environments such as fresh water, crude oil, gasoline, alcohol, some beverages and atmospheres. VAL1Z has its maximum corrosion resistance when hardened + low temperature tempered to its maximum hardness. Its use in the annealed condition or any other situation able to reduce the surface hardness, and in environments containing Chloride, should be avoided. Nevertheless, in case if VAL1Z were used in the annealed condition, it should be considered that its corrosion resistance will depend on the corrosive capacity of the environment. This means that the annealed condition wouldn’t be so detrimental in atmospheric corrosion, or only slightly reduced in mild aqueous environments. It should be noted that this grade, as for every kind of stainless steel, surfaces should be free of contaminant and scale, heat tint, and passivated for optimum resistance to corrosion.

Cold working

In the annealed condition, this grade is not suitable for cold heading and up-setting due to the embrittlement effect of the Sulphur content, and it has not been specifically designed for cold forming and is usually supplied as cold finished round , hexagonal and square bars for machining processes. Blooms or large cross section billets can be cut by band and circular saw or abrasive wheel. If small billets or bars had to be cut by cold shearing paying attention on low temperatures and to the clearance of tools, because this process may cause shear or stress cracks due to the Sulphur embrittled structure.

Machinability

VAL1Z has the good machinability typical of martensitic free machining grades. Productivity gain depends on the types of machines, the kind of tools used and their geometry, cutting fluids and the kind of machine operations on the pieces produced. As in general rule, machinability depends on either Sulphur content or hardness in addition to a suitable structure of bars or shapes.

Weldability

VAL1Z is not recommended for both fusion and friction welding.

Hot working

VAL1Z has not been designed for hot working and is usually supplied as cold finished round, hexagonal and square bars for machining processes. It’s important to know that all free machining grades, particularly Martensitic ones, have a poor hot plasticity and this characteristic must be well evaluated in forging processes. Blooms and ingots require a suitable preheating to avoid cracks and a slow cooling in the furnace after forging. Overheating must always be avoided, in order to reduce the risk of internal bursts. An improper cooling could result in stress cooling cracks. Large forgings and large cross – section shapes should be left to cool until their core reaches room temperature and, then, immediately, heat treated.

Heat treatment

Depending on thickness, geometry and required mechanical properties of parts, VAL1Z could be air or oil hardened. The choice of quenching method depends on the thickness, shape and geometry of pieces and their metallurgical-mechanical requirements as well. The tempering temperature has to be chosen in order to offer the best properties, avoiding those ranges of temperatures and cooling rates able to cause a strong reduction of toughness and resistance. It’s important to point out that high tempering or annealing temperatures impair the corrosion resistance of all martensitic grades.

Designations

AISI 416
W.N. 1.4005
UNS S41600
EN X12CrS13
BS 416S21
Scroll to top